Making colloidal silver?

M

monkeyface

Inactive
How do I make a colloidal siver machine? Or does anyone have one for sale? I used to know of a site that had directions, but cannot find it. Help please. :shr: :shr:
 
A

Albuburbia

Membership Revoked
I got my silver, .9999, from an online jeweler supplier, bought my alligator clips at Radio Shack, stripped the end of the wires on some old wall warts (DC adapters), and made my own for about $5 each. I got enough silver to make several as Christmas presents. My own has extra-long silver rods, for use in a one-gallon pickle jar. I tape the alligator clips to a section of plastic coat hanger that's long enough to reach across the top of the jar. The wall warts only feed 12 volt into the water, but I've heard that the slower the brew, the smaller (and therefore better) the size of the particles.

I highly recommend getting a TDS meter. You can get one on ebay for about $20.00.
 
Watchingbear

Watchingbear

Senior Member
homemade CS

I made the CS generator described here:

http://stenulson.net/althealth/cspulse.htm

It works pretty well, mine comes out clear - not yellow. I make it at room temperatre.
A little "starter" CS in the batch makes it go a lot faster, takes a couple of hours to make a pint jar.

Electrodes are .9999 wire, do not use sterling -sterling contains nickel which is toxic.

http://www.ccsilver.com/silver/superfines.html
http://www.monsterslayer.com/

Also I always use distilled water, not bottled or filtered so that I will not make salts and turn blue.
 
You must log in or register to reply here.
Top