Meadowlark
Has No Life - Lives on TB
Like that old turkish mauser thats been sitting in the safe for years> Asking for a friend of course.
Sell a priceless relic of a bygone era?
(Can you still get ammo for that?)
Like that old turkish mauser thats been sitting in the safe for years> Asking for a friend of course.
You can have a firing pin made out of a nail. I have done it before on a pre 1900. Check with Thinwater.Aldo got a mid 1800’s ‘Zulu Hunter’ - converted from a Belgian musket to a breech loading .557, then to a 12 gauge for the Zulu wars...still trying to find a firing pin for it!
You can have a firing pin made out of a nail. I have done it before on a pre 1900. Check with Thinwater.
If you can use the money for another prep and truly have no problem with probably never getting anything like it back. I am actually in the process of selling a number of guns.
Locally. I use Gunbroker if I do it thru an auction siteDo you mind if I ask where?
Since Armslist went down the paywall-hole, there isn't a clear favorite alternative.
You have metallurgical equipment and the means to heat treat steel?I will, thanks...I’ve already been reading up on it...I kinda figured I’d have to fabricate one...but I’d probably use a harder steel, temper it so I can file it then re-harded it after it’s done...the shape is kinda weird.
View attachment 253952
You have metallurgical equipment and the means to heat treat steel?
Simple A, O, or W hardening tools steels heat and quench to roughly a desired hardness maybe. Alloy steels, probably not without the proper equipment.Sorry, but I must disagree. I also worked for a heat treating company, designating process times and temperatures, as well as performing hardness testing and case depth measurements for quality control. Heat to the proper temperature for a specific time, draw at another temperature for a specific time, and quench in the proper medium. The variables have been established for decades to achieve a specific Rockwell or Brinnell hardness, as well as case measurement.
I think if you ask any machinist or toolmaker whether or not you can harden metal with a torch and quench medium, they will tell you 'of course'.
In welding school they taught basic heat treating that I occasionally use over the years. The process was to heat until cherry red then quench in motor oil. I did this a couple years ago to a set of brush hog blades. The first rock I hit the blades shattered like glass. Could never find all the parts.I think if you ask any machinist or toolmaker whether or not you can harden metal with a torch and quench medium, they will tell you 'of course'.
No kidding. I was in a gun shop a couple days ago looking for "anything that will fit a Judge". I was asked if I wanted to sell my Judge (Taurus Judge, shoots 410's or 45 LC's). The two guys behind the counter said I could get $1200 for it now. This is a revolver that is about $400 new.- - - - - - it is astounding what some folks will pay for a firearm.
Sell them high or pay it forward by selling them cheap to local firearms-disadvantaged young adults?
I like it.... lets start a " Guns for the Amish " charity
know of any metallurgist jobs in Texas?I worked for 7 years in a metal foundry that specialized in precision parts and exotic alloys. I worked for the Process Control and Engineering group. I wrote a bunch of software for the various processes and learned how heat treating is done. What you describe is not heat treating. Frankly, I don’t know WTH it is, but it sounds like a complete waste of time and effort to me.
Sold my buddy some 410 for his Dads Judge the other day. He was thrilled to get it as he couldnt find any.No kidding. I was in a gun shop a couple days ago looking for "anything that will fit a Judge". I was asked if I wanted to sell my Judge (Taurus Judge, shoots 410's or 45 LC's). The two guys behind the counter said I could get $1200 for it now. This is a revolver that is about $400 new.
Oh hell, it's my only 45. But $1,200?No kidding. I was in a gun shop a couple days ago looking for "anything that will fit a Judge". I was asked if I wanted to sell my Judge (Taurus Judge, shoots 410's or 45 LC's). The two guys behind the counter said I could get $1200 for it now. This is a revolver that is about $400 new.