ALERT Lumber

Nopie

Contributing Member
There’s a lumber mill in a town I drive through to get to work. They have a TON of lumber ready to be shipped sitting in their yard. More sitting there than I’ve seen in over a year.

So long as there are trucks to transport it, there’s lumber available where I live (upper N. California).
 
Bout fricking time. Yards are full of way overpriced stuff.

So bad at Lowes they went to digital signage on the 2x4's.
 

poppy

Veteran Member
Neighbor down the road retired and got bored so he took a job at Lowes in the lumber dept. He told me today they are now fully stocked with lumber, including treated lumber and have about $2 million dollars worth of lumber stacked outside. I asked about treated 4x4 posts and he said 10 footers are about $15 but plywood is still very high.
 

medic38572

TB Fanatic
There’s a lumber mill in a town I drive through to get to work. They have a TON of lumber ready to be shipped sitting in their yard. More sitting there than I’ve seen in over a year.

So long as there are trucks to transport it, there’s lumber available where I live (upper N. California).

I live next to one they bring logs in every single day. They are cutting 16 hrs a day and sometimes 24 hrs. I watch as the trains come by not loaded with lumber but several several cars on every train. I watch as semis come in from Canada loaded every single day. This is one road and my point of view. Most of the mills have enough timber to cut upto 3 years according to some that work there.There is no shortage.
 

Jacki

Senior Member
I can tell you that there are three hundred to five hundred truck loads a day going to the mills in the Eugene/Springfield area. I was told that a couple were one log loads, and some three log loads. Those are some big trees!

It appears that a lot of the problems are caused by CV, and the rules in place to "protect" us, the lack of truck drivers, and the "stimulus" funds that discourage working. There are a lot of mills on the river now, but it takes time and a lot of mistakes to get proficient at reading the wood. I don't know how many will stick with the learning curve.

Jacki
 
Top